How time differences are worked out
duration = end time − start time (+ 24 hours if it passes midnight)
Both times are turned into minutes after midnight, subtracted, and turned back into hours and minutes. If the end is earlier on the clock than the start, the period crossed midnight, so a day (1,440 minutes) is added. Any break is taken off at the end.
Examples
| Example | Duration | Decimal |
|---|---|---|
| Office day9:15 am to 5:45 pm | 8:30 | 8.50 h |
| Shift with a 30-minute break8:00 am to 4:30 pm, minus 30 min | 8:00 | 8.00 h |
| Night shift10:00 pm to 6:30 am | 8:30 | 8.50 h |
| Short meeting1:20 pm to 2:05 pm | 0:45 | 0.75 h |
Hours and minutes vs decimal hours
Payroll and timesheets often want decimal hours, where the part after the point is a fraction of an hour, not minutes. To convert, divide the minutes by 60:
| Minutes | Decimal hours |
|---|---|
| 5 min | 0.08 |
| 6 min | 0.10 |
| 10 min | 0.17 |
| 15 min | 0.25 |
| 20 min | 0.33 |
| 30 min | 0.50 |
| 40 min | 0.67 |
| 45 min | 0.75 |
| 50 min | 0.83 |
The classic mistake is reading 7.30 as 7 hours 30 minutes. As a decimal it's 7 hours 18 minutes; 7 hours 30 minutes is 7.50. Going the other way, multiply the decimal part by 60: 0.75 hours is 45 minutes.
Adding up hours and minutes
Add the hours and the minutes separately, then carry every 60 minutes over as an hour. 3:45 + 2:30 is 5 hours 75 minutes, which is 6:15. Converting to decimal hours first (3.75 + 2.50 = 6.25) avoids the carry. To total a whole week of shifts and work out the pay, use the time card calculator.
12-hour and 24-hour times
The hour after midnight and the hour after noon are where most mix-ups happen:
| 12-hour | 24-hour |
|---|---|
| 12:00 am (midnight) | 00:00 |
| 12:30 am | 00:30 |
| 6:00 am | 06:00 |
| 12:00 pm (noon) | 12:00 |
| 12:30 pm | 12:30 |
| 1:00 pm | 13:00 |
| 6:45 pm | 18:45 |
| 11:59 pm | 23:59 |
12 am is midnight at the start of the day and 12 pm is noon. To avoid any doubt in a rota or a booking, use the 24-hour time, or write "midnight" and "noon".
Night shifts when the clocks change
The calculator works on clock times, so it assumes no daylight saving change during the period. On the night the clocks change, a shift really is an hour longer or shorter than the clock difference. A 10 pm to 6 am shift is 8 hours on the clock, but 9 hours when the clocks go back overnight and 7 hours when they go forward.
- UK: clocks go forward on the last Sunday of March and back on the last Sunday of October.
- US: forward on the second Sunday of March, back on the first Sunday of November, in most states.
- Australia: forward on the first Sunday of October and back on the first Sunday of April, in the states and territories that use daylight saving (not Queensland, Western Australia or the Northern Territory).
Rounding on timesheets
Some employers round clock-in and clock-out times, often to the nearest 5 or 15 minutes, so a timesheet can differ a little from the exact duration. In the US, federal rules allow rounding to the nearest 5, 6 or 15 minutes only if, over time, it doesn't leave employees underpaid. Check your employer's policy if your hours don't match.